Correct Procedure For Direct Code Entry example essay topic

444 words
Direct Code Entry To program your universal remote to control your components using the Direct Code Entry Method, follow the steps below. 1. Manually turn on the component you want the remote to control. 2. Locate the enclosed Code Lists. Find the list for the component you wish to program.

Find your component's brand. You will see a listing of four-digit codes for each brand. If your brand isn't listed, use one of the Code Search methods to program the remote control. (Refer to pages 7 and 9 for Manual and Auto Code Search methods.) 3. Press and hold the component key (TV, VCRoDVD, SATo CBL) program. The illuminatedONoOFF key turns on and remains on.

If you release the component key at any time during the Direct Code Entry procedure, the illuminatedONoOFF key blinks four times, and the process is exited. 4. While holding down the component key, consult the Code Lists for the four-digit code that corresponds to your component's brand and use the number keys (0-9) on the keypad to enter it. While you are pressing the numbers, the illuminatedONoOFF key turns off. 5. After the fourth number is entered, the illuminated ONoOFF key turns on.

At this time, release the component key. If the illuminated ONoOFF key turns off, you have entered a valid code and have followed the correct procedure for Direct Code Entry. If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry, the illuminated ONoOFF key blinks four times when the component key is released. This is an indication that programming error has occurred. In that case, repeat the Direct Code Entry process from step 3. TIP: Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control.

6. To confirm that the component key is programmed with the correct code for maximum functionality, test the component. Attempt to control a variety of the component's functions with the remote. If some of the features of your components do not work, try programming the remote with a different code in the list until you find the code that allows the remote to control the majority of your component's functions.

Different codes can provide different levels of functionality. 7. Remember to enter the code for future reference in the box provided in the Code Retrieval sect i.