File Transfer Protocol example essay topic

Synchronous and Asynchronous mode: In telecommunication signaling within a network or between networks, synchronous signals are those that occur at the same clock rate when all clocks are based on a single reference clock. Synchronous communication requires that each end of an exchange of communication respond in turn without initiating a new communication. An asynchronous signal is one that is transmitted at a different clock rate than another signal. Asynchronous operation also means that a process operates independently of other processes, whereas synchronous operation means that the process runs only as a result of some other process being completed or handing off operation. Analog and Digital: Analog communication employs continuous transmission of an electromagnetic wave form that varies in frequency and amplitude.

A digital communication system uses discontinuous transmission that may vary in frequency, amplitude and / or phase to represent binary data. Simplex and Duplex: A communications network can provide many types of service. The most basic type of service is known as simplex. This service provides one-way communication. Examples of this type of service are TV distribution, and the transmission of burglar alarm messages. Most networks transfer data in two directions and are known as duplex communications links.

Duplex links are classified as either full duplex or half duplex (also known as two ways alternate), depending upon whether both local and remote nodes may simultaneously transmit, or whether one must wait for the other to finish before starting transmission. Serial and Parallel Transmission: In telecommunication, serial transmission is the sequential transmission of the signal elements of a group representing a character or other entity of data. The characters are transmitted in a sequence over a single line, rather than simultaneously over two or more lines, as in parallel transmission. The sequential elements may be transmitted with or without interruption. A parallel link transmits several streams of data (representing particular bits of a stream of bytes) along multiple channels (wires, printed circuit tracks, optical fibres, etc. ).

Serial Line Internet Protocol (SLIP) and Point-to-Point Protocol ( ): SLIP and are two communication protocols which allow a computer connected to a server via a serial line (such as a modem) to become an actual node on the internet. This allows you to run network applications on your home computer directly. While SLIP and are largely similar, there are some key differences. is a newer protocol, better designed, and more acceptable to the sort of people who like to standardize protocol specifications. has some additional benefits. Unlike SLIP (which can only transport TCP / IP traffic), is a multi-protocol transport mechanism. This means that not only transports TCP / IP traffic, but can also transport IPX and Apple-talk traffic, to name just a few. Better yet, lets you transport all of these protocols at the same time - on the same connection.

Hypertext Transfer Protocol (HTTP) and File Transfer Protocol (FTP): File Transfer Protocol, or FTP, is a protocol used to upload files from a workstation to a FTP server or download files from a FTP server to a workstation. It is the way that files get transferred from one device to another in order for the files to be available on the Internet. When ftp appears in a URL it means that the user is connecting to a file server and not a Web server and that some form of file transfer is going to take place. Most FTP servers require the user to log on to the server in order to transfer files. In contrast, Hyper Text Transfer Protocol, or HTTP, is a protocol used to transfer files from a Web server onto a browser in order to view a Web page that is on the Internet.

Unlike FTP, where entire files are transferred from one device to another and copied into memory, HTTP only transfers the contents of a web page into a browser for viewing. FTP is a two-way system as files are transferred back and forth between server and workstation. HTTP is a one-way system as files are transported only from the server onto the workstation's browser. When http appears in a URL it means that the user is connecting to a Web server and not a file server. The files are transferred but not downloaded, therefore not copied into the memory of the receiving device. Transmission Control Protocol (TCP) and Internet Protocol (IP): The Internet Protocol (IP) is a network-layer (Layer 3) protocol that contains addressing information and some control information that enables packets to be routed.

IP has two primary responsibilities: providing connection less, best-effort delivery of data grams through an internet work; and providing fragmentation and reassembly of data grams to support data links with different maximum-transmission unit (MTU) sizes. The TCP provides reliable transmission of data in an IP environment. TCP corresponds to the transport layer (Layer 4) of the OSI reference model. Among the services TCP provides are stream data transfer, reliability, efficient flow control, full-duplex operation, and multiplexing. Baseband and Broadband: Baseband is a cable system where audio and video scrambling is used with coaxial or fiber optic cable. A de-synchronizing of the pulse system is involved thus moving the video / audio signal to a neutral channel which is usually FM.

Test equipment restores the pulse synchronization making it possible for vertical and horizontal video and audio signal to stabilize. Broadband is the nonspecific term for high-speed digital Internet access including Digital Subscriber Lines (DSL, T 1/T 3), and the brand new satellite Internet connection.