Moulding To Ones Walls example essay topic
Made of polystyrene or polyurethane b. With large profiles that mimic the look of built-up moulding c. Will not warp, rot or split. Low maintenance material that saws and works just like wood. Lighter than hardwood for easier handling.
Veneer hardwood moulding a. Made by wrapping finger jointed pine moulding with a veneer of real oak, cherry or ma pleb. The veneer is wrapped all the way around to the back completely obscuring the pine base once installed c. The elegance of hardwood moulding at a significant savings. Prefinished moulding a. Made from polystyrene b.
Lower cost than wood moulding c. Comes ready to install d. Finish is applied at the factory saving time and expense. Unfinished solid wood a. Most common moulding used in home sb.
Made from pine or hardwood c. Comes in a multitude of profiles to match almost any decorating style. MDF a. Lightweight engineered wood product b. Less movement due to changes in humidity and temperature. Comes pre primed and ready to paint d.
It's workability and stability make good choice where a paint application is desired Tools Tape measure DropclothDrill / driver Dust mask Bits Caulk gun Hammer Paintbrush or staining brush Level Goggles Miter saw Nail set Materials Wood putty Moulding Stain or paint Nails Caulk 1. Locate and lightly mark the wall studs 2. Measure the distance between two inside corners and cut the piece of moulding to fit. Pre drill the moulding at every wall stud and nail in place. (May need someone to help hold long pieces while you drill and nail). 3.
After all the moulding is up, touch up any raw edges with a light coat of finish. Use wood putty or a filler stick to hide nail holes. For crown moulding, it may be necessary to apply a bead of caulking where the moulding meets the ceiling to close up any gaps The mouldings listed above can be used for crown moulding, moulding around windows and doors, chair rails, and baseboards. However, tile, carpet, and vinyl have been used as baseboards also.
Another way of adding a finishing touch to ones walls is decorative switch and receptacle plates... Switch plates can be simple or intricate and match any decorative style. Come in a variety of materials such as wood, metal, plastic, eat... Very easy to build, decorate, and install. Receptacle Plates are perfect for protecting and hiding duplex wall outlets, cable, and phone jacks. Come in High Abuse Nylon.
Can match switch plates, and other decors within rooms.