Non Asbestos Brake Pads Car Differences example essay topic

408 words
Caliper Brakes Effectiveness: good mechanical advantage as it allows the operator to brake with little effort on the hydraulic lever, which needs to be squeezed. Material: Calipers are fixed mount, opposed piston calipers cast from aluminium alloy. Calipers are the hydraulic clamp portion of the disc braking system. Manufactured from either ferrous or non-ferrous materials and bolted firmly to the suspension upright (or knuckle) the caliper holds the pads in place and, through the action hydraulic pistons actuated by the master cylinder, force them against the rotating surface of the disc when pressure is applied to the brake pedal.

Friction Material: non asbestos brake pads Car differences: size is one major difference in car and bike systems. The systems can be totally different but still use hydraulic mechanisms. Cantilever Brakes Effectiveness: provide good power and modulation. They are very effective in stopping the bike because they provide a large stopping force, but the rider's heel will hit the brake and may irritate the rider and cause the brakes to ruin. Material: includes 2 brake shoes and a brake pad Friction Material: non asbestos brake pads. Car differences: size and shape.

Also consists of lighter materials. V Brakes Effectiveness: basically the same as above. Material: Friction Material: Car differences: Drum Brakes Effectiveness: Very good brains system as they wear very slowly and are not affected by weather. Also used with Disc Brakes. Being on the rear.

Material: A bike drum brake is hand operated which is attached to the hub of the wheel, the shoes press on the inside of the drum. Friction Material: Non asbestos fibre. Car differences: In bikes they are hand operated and in cars they are foot. Drum brakes are completely different to hydraulic brakes.

Hydraulic disc Brakes Effectiveness: Hydraulic brakes have a great mechanical advantage therefore are a very good design of braking system. Material: a disk with 2 shoes, one on either side. When brake pedal is pressed fluid is pumped around the system which goes through the master cylinder and diverts to the 4 wheels and squeezes onto the disk. Friction Material: no asbestos pads. Disc is made of machined steel. Car differences: size is a major difference.

And also foot and hand leverages. Very basic. Good Hand for those Engineering Students: ) Good Luck!