Paint And A Brush example essay topic
Brushes and rollers are the two most known. Other tools include: scrapers, caulk guns, 5-in-1 tools, rags, drop clothes, pot hooks, buckets, self-priming paint, screens, hammers, steel wire brushes, extension poles, wood putty, putty knives, spinners, goo gone bottles, ladder mittens, and a first aid kit. They are all very important to getting the job done right. Once you are familiar with the tools it's time to prepare the house to be painted. Scraping the old chipped portions of paint is the first thing to do. Once you " re done with the scraping, caulking is the second step in preparing the house.
Most of the caulking will be over old caulk that has split apart over the years. Any other gaps you see can be caulked but are usually not necessary. Now the house is ready to paint. The best place to start is with the soffit's. To reach the soffit's you need to place a long ladder against the gutter and place it at a height to distance of the feet from the gutter ratio of 4: 1 feet. This way the angle will not be too steep, which would cause the ladder to fall backwards, nor not steep enough, which would cause the feet to slip back and the top to come crashing straight down.
Now that the ladder is set, you climb up it with your bucket in hand. Inside the bucket you will need paint, a brush, a roller, and a screen. Once the pot hook that's attached to the bucket is hanging on the ladder, you use your brush to paint the board the gutters are touching. Then use your brush to paint the line dividing the siding from the soffit.
Now use the roller to quickly finish the underside of the soffit. With a few ladder movements one side of a house will be done. Siding is the next portion to paint. The siding is the biggest area to paint but the easiest.
First set the ladder against the siding towards the top at the same angle as before. With the same bucket set up with different color paint, using your brush, draw the line separating the siding from the soffit. Then paint the small vertical lines that the roller can't fit into. Take out the roller and paint the big portions of siding. Again the side of a house will be done by repeating this process a few times. The final painting to be done is the detailed work.
The doors and windows usually match the color of the soffit's. You will need a smaller bucket with only paint and a brush inside. The best order to do them in is second level windows, then first level windows, and the doors last. For a second level window set up the ladder on the siding next to the window at the 4: 1 ratio. You start by painting the outside trim touching the siding then work inward. Doors are painted the opposite way as in inner to outer.
Usually there are designs indented into the door that are painted first then smooth long strokes perpendicular to the ground finish the flat parts. Once everything is painted you take a walk around the house looking for mistakes which are always found. Touch up the mistakes and bring all the tools to the crew kit. After you are certain everything is perfect, start cleaning the tools out with a bucket of clean water. Place the brushes in the spinner and spin the paint out of them a few times. Finally pack all the clean tools back into the crew kit so everything is ready for the next time your home needs a fresh coat of paint.