Plug And The Filter For Oil example essay topic

You may have a car or drive a car, but you maybe don! t know how to change your motor oil by yourself. You need to change your motor oil every 3,000 miles or every 3 months. However, you may want to do it more often if you " ve been driving in very hot or dusty conditions. First you need get ready and prepare for change your motor oil. You need pair of gloves. This way you don't get oil on your hands or dirt under your fingernails.

Wear old clothes to perform the oil change because no matter how careful you are, things tend to get dirty. And two jack stands to support the front of your car after jack it up. Of course a bottle of new motor oil, a socket set and oil drain pan. After you get your tools and materials you need run the car's engine for 10 minutes before you drain the oil. Warm oil drains faster than cold oil. Then you need park the car on a level surface, engage the parking brake and turn off the engine.

And jack your car up then put two jack stands on the front of your car. Open the hood and place the new oil and funnel on top of the engine to ensure that you won't forget to add oil afterwards. Now you need ready for draining the oil and changing the oil filter. First you need crawl under the car once it is securely supported. This is very important you must make sure the car is securely supported before you crawl underneath. Second you need find the oil drain plug on the underside of the engine, usually near the front center of the car.

Then you need place the oil drain pan under the plug and loosen the plug with a socket wrench. And remove the plug by hand. Be prepared for the rush of hot oil! Then let the oil drain into the pan. Hold onto the plug. Wipe off the drain plug and the plug opening when the oil finishes draining.

Then replace the drain plug gasket. And reinstall the plug using a socket wrench. Be careful not to over tighten the plug. Next you need locate the existing oil filter. Oil filters are usually on the side of the engine. Then put the oil pan underneath the filter to catch any remaining oil.

And use an adjustable oil filter wrench to unscrew the old oil filter. Then you need use a rag to wipe the area where the filter mounts to the engine. Screw the new filter into place by hand. Now you need installing new oil and cleaning up. First you need find the oil filler cap on top of the engine, and remove it. Then place the funnel in the opening and pour in the new oil.

Typically, you will use 4 to 5 quarts of oil. And Replace the cap when you " re finished. After that you need start the engine for a minute, and then check the dipstick. Add more oil if necessary. You also need to check the area around the oil drain plug and the filter for oil leaks. Tighten the plug or oil filter if you find leakage.

And use rags and newspapers to wipe away excess oil. Then you need pour the used oil into a plastic container after the used oil cools. And bring it to an auto repair shop they can recycle it for you. Now you can change motor oil by yourself. It is not that hard and it is pretty fun.